Installing hardwood flooring can take place in several ways depending on the type of hardwood flooring that you have. If you have solid hardwood, you have to look at the type of wood you have. For example, parquet flooring is one option you can choose, either in the form of six-by-six inch tiles or longer strips or planks that are up to three inches in width. Now the methods of installing hardwood flooring would be a bit different if you are wanting to install laminate wood flooring.
Look inside the packaging of either laminate flooring or solid hardwood flooring and you would be able to find detailed directions to install either type. If you are experienced in installing hardwood flooring but want to diversify by installing glueless laminate flooring, it would be imperative to read the directions for installing laminate flooring. Any time you are installing hardwood flooring and it is made of solid wood, it is important you open the package first and allow the wood to habituate; let it familiarize itself with your home’s temperature conditions. With laminate flooring, you have to do the exact opposite. You should not, in any case, remove the flooring from the package until you are ready to install the flooring.
You need a strategic and calculated approach to properly install either hardwood or laminate flooring. In other words, it might be necessary even if you are working with an existing concrete or vinyl floor and installing hardwood flooring over it, to sweep and vacuum under the floor to clean off any dust or dirt. If you know not how much laminate flooring would be necessary for the project, you can refer to the directions for installing the laminate flooring, as these would include steps on how to measure the room to determine the appropriate amount of flooring. Alternatively, you can visit a flooring store in your area if you are planning to install glueless laminate flooring, and the friendly specialists can do the calculations on your behalf.
Installing glueless laminate flooring is as easy as matching the groove with the tongue and locking the planks with one another so that way they stay bolted on the floor. When installing hardwood flooring like this, you cannot glue, nail or staple it in any way. Adjudge how the lighting enters and shines into a room before you begin the installation process. Begin laying the planks toward the light and in a hallway always install glueless laminate flooring lengthwise.
The directions for installing laminate flooring will tell you that you lay the first plank with the grooves against the wall. As for installing hardwood flooring between the wall and the plank, you will want to install spacers if need be so that a half-inch extension gap can be maintained. You will have to mark and cut the planks as you are installing the flooring because they are of random lengths. If you are installing hardwood flooring, start in a corner of the room and always make sure the first board in each row is a full plank.
We can help fix Los Angeles Housing Department issues including unpermitted, illegal or unapproved construction LA.